Adjustable M5 turnbuckle made from a special blend of HUDY Spring Steel™ which is specifically formulated for turnbuckles.  

Molded composite rear brace holder, can be mounted either on left or right side. 

Inner ball joint for rear upper camber link. Set of 2. 

Molded composite rear upper camber link ball joints fit on the outside end of the camber link turnbuckle of the XT8. Set of 2. 

Mounting pivot ball with shoulder 6.8mm dia. Set of 4. 

Pivot ball 6.8mm diameter. Set of 4. 

Right rear hub carrier. Features 3 upper camber link mounting positions, and 2 lower pin roll-center positions. 

Set of molded composite shims for rear hub carrier adjustment. Set includes: 3.2x9x1mm shims (2x) and 3.2x9x2mm shims (2x). 

Fully redesigned rear wing holder increases stability on high-speed tracks and has a super-slim, 1-piece design for reduced weight and increased strength.  

CVD drive axle made from world-renown HUDY Spring Steel. Strategically machined for toughness and light weight without compromising strength. 

CNC-machined CVD universal drive shaft front/rear suspension made from world-renown HUDY Spring Steel. Strategically-machined, the lightweight drive shaft has been weight-reduced without compromising strength. Hand ground for maximum precision, then individually measured and inspected. The most unique no-compromise off-road drive shafts. 

CVD drive shaft coupling for CVD drive shafts made from world-renown Hudy Spring Steel. Specially hand-ground for maximum precision. 

Hardcoated aluminum wheel axle. Set of 2. 

Hardened 3mm rear lower outer hinge pins are mounted through the rear uprights and locked with self-locking nuts. This concept ensures that suspension pins will never come out during racing and moreover it ensures that the play between the arms and uprights will not change. The upright holder concept reinforces the holding of the upright and prevents the pin or upright from becoming disconnected in crashes. 

M5x4 setscrew, hex drive. Set of 10 pieces. 

M3x14 button-head machine screw, hex drive. Set of 10 pieces. 

M3x18 button-head machine screw, hex drive. Set of 10 pieces. 

M3x30 button-head machine screw, hex drive. Set of 10 pieces. 

M3x12 flat-head machine screw, hex drive. Set of 10 pieces.

 

M3x18 socket-head cap screw, hex drive. Set of 10. 

New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 8x14x4. Set of 2 pieces. 

High-speed ball-bearings for XB8’18 and XB8E’18 manufactured specially for XRAY. ID x OD x thickness (mm) = 13x19x4. Set of 2. 

M3 nylock nut. Set of 10 pieces. 

Polished chrome pin. Dia. x length = 2.5mm x 13mm. Set of 10 pieces.  

Polished chrome pin. Dia. x length = 3mm x 17mm. Set of 10 pieces.